|
FR500 "Cammer"
Fuel Rail Bolt Kit
|
|
The Fuel Rail is mounted on the top center of the Intake Manifold. This kit mounts both
Fuel Rails.
|
| MODSH5.0LCAMMERFRBKBO | | MODSH5.0LCAMMERFRBK188SS | | MODSH5.0LCAMMERFRBK316SS | | MODSH5.0LCAMMERFRBKARPHBO | | MODSH5.0LCAMMERFRBKARPHSS | | MODSH5.0LCAMMERFRBKARP12pBO | | MODSH5.0LCAMMERFRBKARP12pSS |
|
|
|
FR500 "Cammer"
Upper Intake Support
Bolt Kit
|
|
The Upper Intake
Manifold has four (4) support brackets that anchor the corners to provide more stabilization. This kit fastens those
L-shape brackets to the manifold.
|
| MODSH5.0LCAMMERIECSBKBO | | MODSH5.0LCAMMERIECSBK188SS | | MODSH5.0LCAMMERIECSBK316SS | | MODSH5.0LCAMMERIECSBKARPHBO | | MODSH5.0LCAMMERIECSBKARPHSS | | MODSH5.0LCAMMERIECSBKARP12PBO | | MODSH5.0LCAMMERIECSBKARP12PSS |
|
|
|
FR500 "Cammer"
Upper Intake, End Cap or Side Covers
|
|
The Upper Intake Side Covers, are located on both the Right & Left sides of
the Upper Intake 2 Kits needed/Engine
|
| MODSH5.0LCAMMERIMECBKBO | | MODSH5.0LCAMMERIMECBK188SS | | MODSH5.0LCAMMERIMECBK316SS |
|
|
|
FR500 "Cammer"
Intake Air Horn Bolt Kit
|
|
The
Air Horns are located beneath the Upper Intake Side Covers. The Horns are held in
place by three(3) bolts each. There are 8 Horns.
8
Kits needed/Engine
|
| MODSH5.0LCAMMEREBBKBO | | MODSH5.0LCAMMEREBBK188SS | |
MODSH5.0LCAMMEREBBK316SS |
|
|
|
FR500 "Cammer"
Upper Intake Divider Plate, DS
|
|
The Divider Plate is located
in the Upper Intake, behind the Side Covers. They separate the air flow between the two (2) halves of the Plenum.
This kit is for the Driver Side (Left)
|
| MODSH5.0LCAMMERUIMADDSBO | | MODSH5.0LCAMMERUIMADDS188SS | | MODSH5.0LCAMMERUIMADDS316SS |
|
|
|
FR500 "Cammer"Upper Intake Divider
Plate, PS
|
|
The Divider Plate is located in the Upper Intake,
behind the Side Covers. They separate the air flow between the two (2) halves of the Plenum. This kit is for the Passenger
Side (Right)
|
| MODSH5.0LCAMMERUIMADPSBO | | MODSH5.0LCAMMERUIMADPS188SS | | MODSH5.0LCAMMERUIMADPS316SS |
|
|
|
FR500 "Cammer"
Throttle Body Bolt Kit
|
|
The Throttle Body is mounted top/center of the Intake Manifold. This kit mounts it.
|
| MODSH5.0LCAMMERTBBKBO | | MODSH5.0LCAMMERTBBK188SS | | MODSH5.0LCAMMERTBBK316SS | | MODSH5.0LCAMMERTBBKARPHBO | | MODSH5.0LCAMMERTBBKARPHSS | | MODSH5.0LCAMMERTBBKARP12pBO | | MODSH5.0LCAMMERTBBKARP12pSS |
|
|
|
FR500 "Cammer"
IAC Valve Bolt Kit
|
|
The IAC or Idle Air Control Valve, is mounted to the right/top of the Intake Manifold.
This kit mounts it.
|
| MODSH5.0LCAMMERIACVBKBO | | MODSH5.0LCAMMERIACVBK188SS | | MODSH5.0LCAMMERIACVBK316SS | | MODSH5.0LCAMMERIACVBKARPHBO | | MODSH5.0LCAMMERIACVBKARPHSS | | MODSH5.0LCAMMERIACVBKARP12PBO | | MODSH5.0LCAMMERIACVBKARP12PSS |
|
|
|
FR500 "Cammer"
Upper Alternator Support
Bolt Kit
|
|
The Alternator has a small bracket that supports the top of it. This bracket is mounted
to the bottom of the Upper Intake. This kit mounts it.
|
| MODSH5.0LCAMMERAMBBKBO | | MODSH5.0LCAMMERAMBBK188SS | | MODSH5.0LCAMMERAMBBK316SS | | MODSH5.0LCAMMERAMBBKARPHBO | | MODSH5.0LCAMMERAMBBKARPHSS | | MODSH5.0LCAMMERAMBBKARP12pBO | | MODSH5.0LCAMMERAMBBKARP12pSS |
|
|
|
FR500 "Cammer"
Throttle Cable Mount
Bolt Kit
|
|
The Throttle Cable mounting bracket is located on the driver's side/top of the Intake Manifold.
This kit mounts it.
|
| MODSH5.0LCAMMERTCMBKBO | | MODSH5.0LCAMMERTCMBK18-8SS | | MODSH5.0LCAMMERTCMBK316SS | | MODSH5.0LCAMMERTCMBKARPHBO | | MODSH5.0LCAMMERTCMBKARPHSS | | MODSH5.0LCAMMERTCMBKARP12pBO | | MODSH5.0LCAMMERTCMBKARP12pSS |
|
|
|
FR500 "Cammer"
Alternator Mounting
Bolt Kit
|
|
The Alternator is located center/top of the engine. This kit mounts it.
|
| MODSH5.0LCAMMERAMBKBO | | MODSH5.0LCAMMERAMBK188SS | | MODSH5.0LCAMMERAMBK316SS | | MODSH5.0LCAMMERAMBKARPHBO | | MODSH5.0LCAMMERAMBKARPHSS | | MODSH5.0LCAMMERAMBKARP12pBO | | MODSH5.0LCAMMERAMBKARP12pSS |
|
|
|
FR500 "Cammer"
Coolant Cross-Over Tube
Bolt Kit
|
|
The Coolant Cross-Over Tube is located in the top/center front of the engine. It carries
hot coolant out of the engine and toward the radiator. This kit mounts it.
|
|
|
|
FR500 "Cammer"
Front Timing Cover Bolt
Kit
|
|
This kit mounts the Front Timing Cover to the front of the Engine.
|
| MODSH5.0LCAMMERFCBKBO | | MODSH5.0LCAMMERFCBK188SS | | MODSH5.0LCAMMERFCBK316SS | | MODSH5.0LCAMMERFCBKARPHBO | | MODSH5.0LCAMMERFCBKARPHSS | | MODSH5.0LCAMMERFCBKARP12PBO | | MODSH5.0LCAMMERFCBKARP12PSS |
|
|
|
FR500 "Cammer"
Belt Tension Adjuster
Bolt Kit
|
|
The
Serpentine belt Tensioner is located on the front/right side of the engine. This kit mounts it.
|
| MODSH5.0LCAMMERBT1HMKBO | |
MODSH5.0LCAMMERBT1HMK188SS | | MODSH5.0LCAMMERBT1HMK316SS | | MODSH5.0LCAMMERBT1HMKARPHBO | | MODSH5.0LCAMMERBT1HMKARPHSS | | MODSH5.0LCAMMERBT1HMKARP12PBO | | MODSH5.0LCAMMERBT1HMKARP12PSS |
|
|
|
FR500 "Cammer"
Idler Pulley Bolt Kit
|
|
The Idler Pulley mounts
to the Front Cover. This kit mounts that part.
|
| MODSH5.0LCAMMERIPMBKBO | | MODSH5.0LCAMMERIPMBK188SS | | MODSH5.0LCAMMERIPMBK316SS | | MODSH5.0LCAMMERIPMBKARPHBO | | MODSH5.0LCAMMERIPMBKARPHSS | | MODSH5.0LCAMMERIPMBKARP12PBO | | MODSH5.0LCAMMERIPMBKARP12PSS |
|
|
|
FR500 "Cammer"
Windage Shield
Bolt & Nut Kit
|
|
The FR500 Cammer Engine has a very unique 2-piece Windage Tray. The Bottom
Section mounts to the main Bearing studs with nuts. The kit
was made by McLaren Racing and is a piece of art. The main
section (Top) is very intricate and heavily ribbed, while the Shield Plate (Bottom) uses bolts to fasten to the Tray.
|
| MODSH5.0LCAMMERWTBKBO | | MODSH5.0LCAMMERWTBK188SS | | MODSH5.0LCAMMERWTBK316SS | | MODSH5.0LCAMMERWTBKARPHBO | | MODSH5.0LCAMMERWTBKARPHSS | | MODSH5.0LCAMMERWTBKARP12pBO | | MODSH5.0LCAMMERWTBKARP12pSS |
|
|
|
FR500 "Cammer"Water Pump Mounting Bolt Kit Water Pump Mounting Stud Kit
|
|
Kit
mounts the Water Pump to the Block with Bolts Kit mounts the Water Pump to Block with Studs
|
| MODSH5.0LCAMMERWPMBKBO | | MODSH5.0LCAMMERWPMBK188SS | |
MODSH5.0LCAMMERWPMBK316SS | | MODSH5.0LCAMMERWPMBKARPHBO | | MODSH5.0LCAMMERWPMBKARPHSS | | MODSH5.0LCAMMERWPMBKARP12PBO | | MODSH5.0LCAMMERWPMBKARP12PSS | |
|
| MODSTUD5.0LCAMMERWPMK8.8 | |
MODSTUD5.0LCAMMERWPMKARP300 | | MODSTUD5.0LCAMMERWPMKARP10.9 |
|
|
|
FR500 "Cammer"Camshaft Bearing Cap Bolt Kit
|
|
The Camshaft Bearing Caps on this engine are
individual caps, not a group like most other DOHC engines. These Bolt Kit replaces the stock bolts with
Socket head, Hex or 12 Point bolts of a much higher quality. We also have ARP Studs listed below. 2 Kits needed per Engine
|
| MODSH5.0LCAMMERCBCBKBO | |
MODSH5.0LCAMMERCBCBK188SS | | MODSH5.0LCAMMERCBCBK316SS | | MODSH5.0LCAMMERCBCBKARPHBO | | MODSH5.0LCAMMERCBCBKARPHSS | | MODSH5.0LCAMMERCBCBKARP12PBO | | MODSH5.0LCAMMERCBCBKARP12PSS |
|
|
|
FR500 "Cammer" Throttle Position
Sensor Bolt Kit
|
|
The
Throttle Position Sensor, monitors the position of the Throttle Blade. It is located
on the side of the Throttle Body itself.
|
| MODSH5.0LCAMMERTPSBKBO | | MODSH5.0LCAMMERTPSBK188SS | | MODSH5.0LCAMMERTPSBK316SS |
|
|
|
FR500 "Cammer" Water Pump Pulley Mounting
Bolt Kit Water Pump Pulley Mounting Stud Kit |
|
The
Water Pump Pulley mounts to the hub of the Water Pump. This kit mounts the Water
Pump Pulley with Bolts. This kit mounts the Pulley with STUDS.
|
| MODSH5.0LCAMMERWPPMBKBO | | MODSH5.0LCAMMERWPPMBK188SS | | MODSH5.0LCAMMERWPPMBK316SS | | MODSH5.0LCAMMERWPPMBKARPHBO | | MODSH5.0LCAMMERWPPMBKARPHSS | | MODSH5.0LCAMMERWPPMBKARP12PBO | | MODSH5.0LCAMMERWPPMBKARP12PSS | | | | MODSTUD5.0LCAMMERWPPMK8.8 | |
MODSTUD5.0LCAMMERWPPMKARP300 | | MODSTUD5.0LCAMMERWPPMKARP10.9 |
|
|
|
FR500 "Cammer" Dip Stick Mounting Bolt Kit
|
|
The Engine
Oil Level Dip Stick is located on the Driver’s Side front of the engine and attached to the Head by a single Bolt W/Spacer.
|
| MODSH5.0LCAMMERDSTBKBO | | MODSH5.0LCAMMERDSTBK188SS | | MODSH5.0LCAMMERDSTBK316SS | | MODSH5.0LCAMMERDSTBKARPHBO | | MODSH5.0LCAMMERDSTBKARPHSS | | MODSH5.0LCAMMERDSTBKARP12PBO | | MODSH5.0LCAMMERDSTBKARP12PSS |
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
